Sears Ice Maker Repair Spring Valley
Common Repairs for Sears Ice Making Units
Sears Ice Maker Repair Spring Valley are convenient appliances to own but they can also be difficult to maintain. Appliance repair Spring Valley for ice machines are usually performed by qualified mechanics. However, some repair work can be performed by owners. Here is a list of the most common problems that occur with refrigerator ice maker machines and how they can be fixed.
1. The Water Inlet Valve is Defective
The water valve supplies an ice maker unit with the liquid it needs to make water. When an ice maker has to produce ice it does so by turning off a switch. When the switch is turned off or closes an electric circuit is used to power a solenoid based water valve. The valve allows liquid to flow through the line and into an ice cube tray. The water is then frozen into cubes and the cubes are dumped into a unit’s bin. It is easy to remove a Sears 15 in. Ice Maker.
When a valve malfunctions owners will start to see strange or disfigured refrigerator ice. In some cases they might even get a huge chunk of ice instead of individual cubes. This is more than likely due to a malfunctioning valve. A malfunctioning valve could be the result of mineral and sediment build up on the inlet screen or it could be the result of a solenoid wire becoming tangled.
These problems can be tested and repaired by unplugging the ice maker unit (or refrigerator) and then turning off the water supply. The next step is to remove the access panel that is located on the back of the unit and then empty out the water tube that provides moisture to the unit.
A person will then need to remove the solenoid electrical contact to test this part of the unit. At this point a person might want to use the services of an electrician, plumber or repair man to correct the problem. It is not advisable for a person to perform this action without having the proper knowledge. A ice maker Sears refrigerator should always be worked on with caution by owners.
Even though the refrigerator has been unplugged some electric current could still remain inside of the unit. This is also true for a Sears elite ice making model. Proceed with caution. Owners should also remove and clean the screens. They can do this with a soft to medium cleaning brush and by rinsing the unit with water.
2. The Ice Maker Unit is Frozen
Eventually, all ice maker units will freeze over and when they do this will cause a unit not to work. This is a common problem with undercounter ice maker. When this happens unplug the refrigerator and remove the ice bin. Find the fill tube and warm it up with a hair dryer or by allowing it thaw on its on. If you decide to use a hair dryer make sure you are not allowing any water or moisture to get into the unit. Use with extreme care. Hot water will also help to safely thaw a frozen over fill tube.
3. The Ice Making does not make Ice
Ice maker units not producing ice is a common problem. Sometimes ice maker on Sears refrigerator repair Spring Valley not working because of this problem. The first thing that a person should do is to unplug the refrigerator repair Spring Valley. Then check the water supply line or fill tube. Small ice cubes is an indication of a frozen filled tube. Make sure it is not frozen or blocking the inflow of water. Then check the tap valve to ensure it is working properly. This part of the unit is located at the back of the refrigerator and it connects the supply line to the water pipes.